When you call about a heating or cooling problem, the first thing you get is a straight answer about what the system is probably doing and what it will take to find out for certain. We ask a few questions, tell you what the visit covers, and confirm a price before anything is scheduled. That is how it works from the first call to the end of the job.
We handle the full range of heating and cooling work across Savannah: AC repair, heat pump installation and service, ductwork repair and sealing, indoor air quality and air filtration, thermostat and smart-control installation, and full system replacement. Apartment managers dealing with a unit that has gone down, business owners with a rooftop system running short, and homeowners who have never had the equipment looked at all reach us the same way.
Call (912) 742-8959 and we will talk through what the property needs. We are available every day from 8:30 AM to 10:00 PM.
The call itself does most of the work. Before we schedule anything, we ask what the system is doing, what type of equipment you have, and how long the problem has been going on. If the unit is blowing warm air, short-cycling, or not running at all, those details change what the visit covers and how long it takes.
What helps us quote accurately:
You get a price on the phone before a visit is confirmed. The quote covers what the diagnostic involves and what the visit includes. If the repair turns out to be more involved than the call suggested, we explain that before any additional work is done.
A full replacement is a bigger decision than a repair, and the process reflects that. It starts on the call with a conversation about the space: the square footage being conditioned, whether the existing ductwork is in good shape, and what the new equipment needs to handle. A system sized to the actual load runs better and costs less to operate than one sized to match what came before.
Once the scope is set and the equipment is selected, you get a written scope before the installation begins. That covers what is being installed, what the job includes, and what the price is based on. For most residential replacements, the property is without heating or cooling for the working day. We talk through the timeline on the call so there are no gaps in what you expect.
Decisions that need to be made before installation starts include equipment type, whether a thermostat or smart control is being added, and whether the existing ductwork needs to be sealed or repaired before the new unit goes in. Catching duct issues before installation matters because a new system pushing conditioned air through leaking ducts is never going to perform the way it should.
A system that has stopped cooling entirely is not a situation to wait on, and we take those calls. When you call about a property with no cooling, we scope the situation on the phone, confirm what the visit covers, and work to get something on the schedule as quickly as the calendar allows. We are available every day from 8:30 AM to 10:00 PM, and that includes weekends.
The call covers more than just booking a time. We ask about what the system was doing before it stopped, whether it is making any noise, and whether the air handler is running while the outdoor unit is not. Those details help narrow down what the visit needs to address.
Rental units with tenants, commercial spaces with equipment that cannot overheat, and buildings where people are working all day are situations where a fast response matters for reasons beyond comfort. We work around those constraints. Let us know what the property situation is on the call and we will confirm what the schedule allows and what the visit covers.
A compressor that has seized or a condenser that is not rejecting heat properly will show up as a system that runs but does not cool. The outdoor unit may be running continuously, or it may be tripping the breaker. Either way, the diagnostic starts with the pressures and the electrical side before any parts are discussed. A condenser coil that is clogged with debris is a different repair from a compressor that has failed internally, and the cost difference is significant.
Short cycling, where the system starts, runs for a minute or two, and then shuts off, is one of the more common calls we take. It can come from a refrigerant issue, a dirty evaporator coil restricting airflow, an oversized system that reaches setpoint too quickly, or a control board fault. The season a system struggles in says a lot about the fault. A system that short cycles only under heavy cooling load points somewhere different from one that does it on a mild day.
Heat pumps are the right equipment for this region because a single unit handles both heating and cooling efficiently across a climate with mild winters and a long cooling season. Installation starts with a load calculation and a conversation about whether the existing ductwork and air handler are staying or being replaced. Mini-split configurations are also available for spaces without ductwork or for additions that do not connect to the central system.
A heat pump that is not heating correctly in cooler weather is often a defrost cycle issue. The defrost cycle clears ice from the outdoor coil so the unit can keep absorbing heat from the air. When it fails, the coil ices over and the system loses capacity. The repair involves checking the defrost board, the defrost thermostat, and the reversing valve. We go through each of those on the diagnostic visit rather than replacing components based on a guess.
The cost of a repair depends on what the diagnostic finds. Refrigerant work, a failed compressor, or a control board replacement all land differently than a capacitor swap or a thermostat calibration. What has to be reached inside the unit, and how long that takes, is part of the calculation too. We do not quote a final number until we know what the system actually needs.
For a replacement, the price is based on the equipment selected, the size of the system, and what the installation involves. If the ductwork needs sealing or the air handler is being replaced alongside the outdoor unit, that changes the scope and the price. We walk through all of that on the call before anything is confirmed.
Repairs and replacements are both quoted before the work starts. If the diagnostic turns up something that was not visible from the outside, we explain what it is and what it costs before we proceed. You are not handed a bill at the end of a visit for work that was not discussed.
Commercial properties in a city the size of Savannah often cannot simply close for the day while HVAC work is being done. A restaurant kitchen, a medical office, a retail space with refrigerated stock, or a building with servers that need cooling all have constraints that a residential repair does not.
We work around business hours where the job allows. Some repairs can be staged so that part of the building retains cooling while another section is being worked on. Others need a full shutdown but can be scheduled early in the morning before the space fills. Let us know what the property needs to keep doing and we will talk through what is possible on the call.
Commercial quotes follow the same process as residential ones. The scope is confirmed before the work starts, and the price is based on what the job actually involves. Property managers overseeing multiple systems can call with the details of each and we will work through what each location needs.
We serve Savannah and the communities around it throughout Chatham County. That includes Georgetown, Henderson, Garden City, Vernonburg, and Montgomery.
If you are in the area and want to confirm we cover your address, call (912) 742-8959 and we will check it on the call.
Coverage is not limited to one part of the city. Residential properties, apartment buildings, and commercial accounts across Savannah and the surrounding communities are all welcome to call. The process is the same wherever the property is: a conversation about what the system is doing, a price before anything is scheduled, and a visit that covers what was discussed. Each service is described in more depth on the page that lists our HVAC services.
A squeal coming from the air handler typically points to a blower motor bearing that is wearing out or, on older equipment, a belt that needs attention. Either situation is worth addressing before the motor fails entirely, since a failed blower motor means no airflow even if the rest of the system is working.
In most cases, yes. Upgraded filtration and whole-home air purifiers can be integrated into an existing system at the air handler level. The right option depends on the current system configuration and the airflow it can support, which we assess on the call before recommending anything.
It is one of the main factors. If the repair cost is high relative to what a replacement would cost, and the system is old enough that other components are likely to follow, replacement is often the more sensible path. We do not push replacement when a repair is the right answer, and we do not push repair when the numbers say otherwise.
Yes. Property managers with several units can call with the details of each property and we will work through what each system needs. Maintenance scheduling, repair calls, and replacement quotes can all be handled across a portfolio. The process is the same for each unit: a conversation about the system, a price before the visit is confirmed, and a written scope on any installation or replacement work.
Call (912) 742-8959 during our hours, 8:30 AM to 10:00 PM every day, and we will scope the situation on the phone.
Weekend and holiday calls are handled the same way as any other day. We confirm what the visit covers and what it costs before anything is scheduled, and we will let you know what the earliest available time looks like.
Yes. A noise that was not there before almost always points to something that will get worse if left alone. A banging, squealing, or rattling sound during operation can indicate a loose component, a worn bearing, or a refrigerant issue, and catching it early is less disruptive than waiting for a full breakdown.
Call us and we will discuss what scheduling options are available. If access needs to be arranged through a tenant with a specific availability window, let us know the constraints when you book and we will confirm whether the schedule can accommodate them.
Call (912) 742-8959 and tell us what the property is doing.
We will ask a few questions, scope the visit on the phone, and confirm a price before anything is booked. We are available every day from 8:30 AM to 10:00 PM.
View our whole service area. Close by, we also take heating and cooling work in: Georgetown, Garden City, Skidaway Island, Bloomingdale, Richmond Hill.
Below is a quick look at the heating and cooling work we handle across Savannah and Chatham County. Each service is listed with what the visit covers, who it fits best, and a practical note to help you decide what to schedule first.
Call us at (912) 742-8959 any day from 8:30 AM to 10:00 PM and we will walk through the details for your specific system.
| Service Type | What It Covers | Best For | What to Keep in Mind |
|---|---|---|---|
| Thermostat & Smart-Control Installation |
| Anyone looking to improve temperature consistency or reduce energy use with programmable controls | A smart thermostat can make a noticeable difference in how evenly the system holds temperature through the day |
| Seasonal Maintenance & Tune-Ups |
| Homeowners and property managers who want the system checked before peak season demand | Scheduling before the summer cooling season means shorter wait times and a system that has been verified before it runs daily |
| Full System Installation & Replacement |
| Homeowners replacing an aging system or upgrading to a higher-efficiency unit | A load calculation ensures the replacement unit is sized for the actual space, not just matched to what came before |
Call us at (912) 742-8959 any day from 8:30 AM to 10:00 PM and we will talk through what the job involves, give you a clear price, and get it on the schedule.
(912) 742-8959